Brand: Matsuhaku
Model: MH-300FR
Price: USD 0.00 / 1
Min. Order: 1 set 1
foaming rate tester
plastic
Suitable for:
Rigid foamed plastic, Soft foamed plastic, Foamed materials research lab.
Principle:
According to the ratio of the volume of finished product to the volume of the raw materials particles. Foaming rate= V before foaming / V after foaming
Functions:
1. Easy calculation, it can show the foaming rate of foamed plastic directly.
2. According to foaming rate, it can judge the foamed plastic belonging low foaming or high foaming products.
3. By adopting the design of big tank, it can decrease the inaccuracy caused by supporting wire’s buoyancy.
4. When using corrosive liquid as medium, the anti-corrosive water tank can be chosen.
Specification:
Model: MH–300FR
Weighing range: 0.01g - 300g
Value showed: foaming rate, apparent density
Testing sorts: EPS, PUR, PE, PF, UF
Testing time: About 5 seconds
Testing range: The materials all can be tested no matter the density is greater or less than 1
Testing precision: 0.1% 0.001 g/cm3