Brand: noblift
Model: CL1529
Min. Order: 1
electric stacker CL1529
noblift
transportation
1KG=2.2LB 1INCH=25.4MM

Up to h3 mm
ACTUAL CAPACITY (Q) kg

2500 1500 1000
2900 1000 700
3400 800 500
Load centre distance (C)mm 600 700

Smooth travel and lift combine excellent controls to reduces product damages and increases productivity.

Lift limit switch operates at maximum lift height to shut off pump motor.

A heavy-duty 24-volt electrical system provides good travel and lift speeds.

High quality hydraulic pump assures very little noise, maximum efficiency and durability.

Drive units is equipped with an electromagnetic brake that is spring applied and electrically released. The brake is activated by the control handle position. The handle is ergonmically designed with a raise, lower and horn button.

Speed automatically reduces when driving with the forks at a height of 12" or higher.

Small turn radius makes it suitable for narrow passage ways.

The CURTIS electronic controller helps provide plenty of low end torgue while in creasing the motor and battery life.

Foot pedal reduces fatigue.

Built-in charger.

Conforms to EN 1726-1 and EN 1175-1


--------------------------------------------------------------------------------

With CURTIS electric control from Germany

Equipped with METRLROTA driving wheel and HPI pump unit from Europe.

Heavy duty design with top quality mast construction of HOSCH steel from Germany.

1KG=2.2LB 1INCH=25.4MM

Identification
1.2 Manufacturer’s type designation CL1529I CL1529IFFL CL1534I CL1534IFFL
1.3 Drive:electric(battery or mains),diesel, petrol,fuel gas,manual electric
1.4 Type of operation:hand, pedestrian,standing ,seated, order-picker Pedestrian
1.5 Load Capacity /rated load Q (t) 1.5
1.6 Load center distance C mm
600
1.8 Load distance, centre of drive axle to fork X mm 677
1.9 Wheelbase y mm 1183 1168
Weights
2.1 service Weight Kg 1020 1040 1120 1140
2.2 Axle loading, laden front/rear Kg 1195/1325 1205/1335 1245/1375 1225/1385
2.3 Axle loadings, unladen front/rear Kg 755/265 770/270 826/295 840/300
Wheels,Chassis
3.1 Tyres:solid rubber, superelastic, pneumatic, polyurethane) polyurethane
3.2 Tyre size, front 250x78
3.3 Tyre size, rear 80x70 1)
3.4 Additional wheels(dimensions) 150x54
3.5 Wheels, number front/rear(x=driven wheels) 1x+2/4
3.6 Track width,front b10(mm) 685
3.7 Track width,rear b11(mm) 390/515
Basic Dimensions
4.2 Lowered mast height h1(mm) 1950 1950 1695 1695
4.3 Free lift h2(mm) 144 1482 - 1104
4.4 Lift height h3(mm) 2814 2814 3314 3314
4.5 Extended mast height h4(mm) 3280 3280 3904 3904
4.9 Height of tiller in drive position min./max. h14(mm)

985/1365
4.15 Lowered height h13(mm) 86
4.19 Overall length l1(mm) 1940 1925
4.20 Length to face of forks l2(mm) 790 775
4.21 Overall width b1(mm) 805
4.22 Fork dimensions s/e/l(mm) 60/180/1150
4.25 Width over forks b5(mm) 570/695
4.32 Ground clearance, center of wheelbase m2(mm) 50
4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147
4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123
4.35 Turning radius Wa(mm) 1480 1465
Performance Data
5.1 Travel Speed, laden/unladen km/h 5.1/5.4
5.2 Lift speed, laden/unladen mm/s 105/170
5.3 Lowering speed, laden/unladen mm/s 100/95
5.8 Max.gradient performance, laden/unladen % 6/12
5.10 Service brake Electromagnetic
E-Motor
6.1 Drive motor rating s2 60min kw 1.2
6.2 Lift motor rating at s3 15% kw 3.0
6.3 Battery acc. To DIN, no 3PZS
6.4 Battery voltage, norminal capacity V/Ah 24/210
Others
8.1 Type of drive control MOSFET Control
8.4 Sound level at driver’s ear acc.to EN12053 dB(A) 67