Copper Shot2010-7-29
It is used for removing oxidation skin,burr,eliminating surface defect,removing stress,etching,unknit,strengthen,prevention rust before painting of metal...
|
Zinc Shot2010-7-29
Chemical Composition: Zn≥99%
Microhardness:45~50HV
Tensile Intensity:90~120Mpa
Durability:6000 Times
Microstructure Deformed α
Density:7.1g/cm3
Bulk...
|
Aluminium Shot2010-7-29
Packing: 25kgs/bag, 40bags/ton/pallet or 1000kgs/big bag
Chemical Composition: Al>99%
Microhardness:45~50HV
Tensile Intensity:80~240Mpa
Durability:6500...
|
Stainless Cut Wire Shot2010-7-29
SUS304, SUS430 SUS410 Stainless steel cut wire shot
Size: 0.3mm-1.5mm
Hardness: HVC400-600
Chemical elements: C: ≤ 0.12%; Gr: 17-19%; Ni: 7-10%; S: ≤ 0.03%;...
|
Stainless Steel Shot2010-7-29
SUS304, SUS430 SUS410
Size: 0.3mm-1.5mm
Hardness: HVC400-600
Chemical elements: C: ≤ 0.12%; Gr: 17-19%; Ni: 7-10%; S: ≤ 0.03%; P: ≤ 0.035%
Microstructure:...
|
Q15gn/Q28gn Series Tumble Belt Type Shot Blasting Machine2010-7-29
This series is used for removing the sand and the oxided surface of the workpieces such as the casting,forging as well as the weldment.Owing to the perfect ...
|
Q69 Series Steel Profiles Shot Blasting Machine2010-7-29
The series of Q69 steel sheet shot blasting pre-treament line are mainly consist of warm-up, shot blasting and spray painting and drying process.It applies to...
|
Q48 Single Route Series Hanger Stepping Type Continous Working Overhead Rail Sho2010-7-29
This series uses multiple-step and rotating point fixed method to clean away the antiquated sand and oxidation layer from the surface quickly,and makes the surface...
|
Qt37 Double Hung Pass-Through Machine2010-7-29
The machinery type of this series fits for cleaning up section steel , ,steel structure , I-steel board architectural machine and other large jointing mechanical...
|
Q38 Double Route Serieshanger Chains Type Continuous Working Overhead Rail Shot2010-7-29
This series uses multiple-step and rotating point fixed method to clean away the antiquated sand and oxidation layer from the surface quickly,and makes the surface...
|
Q37 Overhead Rail Spinner Hanger Machine2010-7-29
This series for the hook type shot blasting cleaning machine, is mainly used for casting. structural, non-ferrcus alloy parts and other parts of the surface...
|
Q35 Series Turning Plate Type Shot Blasting Machine2010-7-29
Product Description: The family of devices for the steel and the casting surface cleaning and strengthening, but also applicable to the surface of embryos just...
|
Q32 Series Tumble Belt Shot Blasting Machine2010-7-29
This series is used for surface cleaning,rust romoving,and surface intensification of each kind of middle and small scale casting, forging and job. It is suitable...
|
Steel Cut Wire Shot2010-7-29
Blast cleaning of Steel cut wire:Used for blast cleaning of casting, die-casting, forging,sand removal of casting, steel plate, H type steel, steel structure.
...
|
Steel Grit2010-7-29
Products Steel grit
Chemical Composition C 0.70~1.20%
Mn 0.6~1.20%
Si 0.40~1.20%
S Less than 0.05%
P Less than 0.05%
Microhardness Normal: 40~50HRC...
|
Steel Shot2010-5-17
Name
Cast Steel Shot
Chemistry composition
C(C)
0.70~1.20%
Manganese(Mn)
0.60~1.20%
Si(Si)
0.40~1.20%
S(S)
...
|